Flight Line
Test Set
AVX-10K
Nav/Comm
Test Set
IFR4000
XPDR/DME/TCAS
Test Set
IFR6000
Military XPDR
Test Set
IFR6015
GPS
Simulator
GPSG-1000
Radio Altimeter
Test Set
ALT-8000
Military Radio Altimeter
Test Set
ALT-8015
Fuel Quantity
Test Set
PSD90-1C
XPDR Antenna
Coupler
UC-584
TCAS Antenna
Coupler
TC-201A
GPS Antenna
Coupler
GC-130
MK XII/XIIA IFF
Test Sets
APM-424
MK XIIA/TACAN IFF
Test Set
IFF-45TS
Avionics
ATE
IFF-7300S
XPDR/DME
Test Set
ATC-5000NG
TCAS
Test Set
RGS-2000NG
Radio Altimeter
Test Set
ALT-9000
UC-584
TC-201A
GC-130
APM-424
IFF-45TS
IFF-7300S
ATC-5000NG
RGS-2000NG
Performance verification testing of critical airborne systems from a single device
A portable unit designed for the testing of navigation instruments and communication system
The IFR 4000 is a compact, lightweight and weatherproof unit designed for testing ILS, VOR, Marker Beacon and VHF/UHF communications avionics systems
The IFR 4000, with its lightweight size (under 8 lbs.), long run time battery (8 hrs) and ergonomic design, will provide the user with the most portable navigational communications ramp test set on the market today. The menu driven functionality and guided test capability make this instrument extremely easy to use.
Simulation of Localizer and Glideslope signals with variable settings and testing of ELT.
Test modes A/C/S, 1090 MHz ADS-B and 978 MHz UAT, TCAS I and II and DME
IFR6000 is a compact, lightweight and weatherproof unit designed for testing transponder modes A/C/S, 1090 MHz ADS-B and 978 MHz UAT, TCAS I and II, and DME. The IFR6000 features an extremely easy to use interface where every parameter the user commonly needs to view is displayed on screen.
The IFR6000 is the only ramp test set capable of verifying all aspects of next generation transponder testing, including ADS-B testing, FIS-B and TIS-B testing. Most tests can be completed without leaving the main user screens. This simplifies the line technician’s testing task. Optional testing using UC-584 coupler.
Test Transponder Modes 1, 2, 3/A, C, and S, DME, TCAS I & II, ADS_B UAT, TIS I, Military E-TCAS and TACAN Avionics Systems
The IFR6015 is a compact, lightweight and weatherproof unit designed for testing Transponder Modes 1,2,3A,C,S, TCAS I, II, and Military E-TCAS, TIS as well as DME/TACAN. IFF Modes 1,2 and TACAN are standard on all new units.
Radiated Testing: The IFR6015 is supplied with a lightweight fully sealed directional antenna that may be test set mounted, hand held or tripod mounted.
Direct Connect Testing: The IFR6015 may be directly connected to the UUT via a supplied RF coax cable via the RF I/O port.
Direct Connect with Coupler Testing: Isolated testing can be accomplished with use of an optional single or dual coupler kit for diverse systems.
The configurable GPSG-1000 is a truly portable, easy-to-use GPS and Galileo positional simulator. It fills a gap in the market by providing a low-cost 12 channel test set that creates three-dimensional simulations. This new simulator is also designed to be software upgradable.
Versatile time-saving portable test set for GPS/GALILEO receivers including WAAS/EGNOS SBAS simulation. Testing of non-encrypted military GPS receivers. Positive Train Control. Asset tracking and telematics.
Versatile, time-saving, portable test set for testing installed FMCW and pulse radio altimeters
The ALT-8000 is the world’s first and only RF-based portable radio altimeter flight line test set. It weighs approximately 10 lbs. (4.5 kg) with a large 12-inch color touch-screen, making it easy to use. The ALT-8000 tests from the tX/RX antennas to the indicator in the cockpit, allowing the operator to replicate in-flight conditions, and isolate a bad component of the installed system.
The ALT-8000 is a universal test set for 4.3 GHz FMCW (frequency modulated continuous carrier wave) radio altimeters and pulse radio altimeters.
Profiles – The Profile page allows the user to create, save, recall or delete named profiles.
Versatile, time-saving, portable test set for testing installed FMCW and military pulse altimeters
The ALT-8015 is the world’s first and only RF-based portable radio altimeter flight line test. The ALT-8015 tests form the TX/RX antennas to the indicator in the cockpit,allowing the operator to replicate in-flight conditions,and isolate a bad component of the installed system.
The ALT-8015 Radio Altimeter Flightline Test Set provides an easily configurable RF based altitude simulation to quickly test an installation, or direct connect to the Line Replaceable Unit (LRU) for additional troubleshooting capability. Crates profiles to control dynamic altitude simulations
The PSD90-1C Universal AC/DC Capacitance Test Set will test any AC or DC capacitive fuel, water, LOX/engine oil, or other AC capacitance system. The test set includes features that allow the user to better troubleshoot and isolate fuel system problems.
Rugged in design, the unit can be used anywhere troubleshooting is required. Capable of being operated with external power, the PSD90-1C is ideal for shop or Depot Level repair of fuel system components.
The UC-584 Series Transponder Antenna Couplers are designed to solve the problem of reliable FAR Part 43 Appendix ‘F’ ERP (Effective Radiated Power) and transponder MTL (Minimum Trigger Level) testing, in the high multi-path ramp and hangar environments.
The innovative design of these couplers include an integral positioning slot ensuring a high level of measurement repeatability is achieved, saving test time. Available in single and dual coupler kit configurations.
The TC-201A TCAS / Transponder Directional Antenna Coupler builds on the VIAVI industry-leading expertise in avionics testing equipment. This newest coupler is used on directional TCAS and combined TCAS / Transponder antennas to shield the RF signal during testing of the TCAS or transponder system.
The TC-201A, when used with the IFR6000, IFR6015, or APM-424(V)5 supports maintenance testing in the airborne condition without interfering with air traffic control or nearby aircraft.
The GC-130 GPS Antenna Coupler provides >20 dB of antenna isolation, ensuring outside GPS signals are not seen by the aircraft’s GPS receiver when simulating a user defined GPS signal.
The coupler mounts directly over the aircraft’s GPS antenna. The GC-130 is designed for use with the VIAVI GPSG-1000 GPS Simulator to accommodate the GPS antenna of the system under test.
Verification of mission critical Mode 5 IFF Go/ No-Go operation
The VIAVI APM-424(V)5 easily accommodates a variety of aircraft, ground, and ship platforms to test transponder and interrogator performance. The APM-424(V)5 is a Mode 5 and ADS-B performance and capability upgrade to the TS-4530 and APM424 legacy test sets. The unit closely replicates legacy operation for utilization of existing procedures, making the APM-424(V)5 a cost effective, highly accurate upgrade to fielded test sets.
The APM-424 is offered in two standard configurations
APM-424(V)4 MK XII Test SetAPM-424(V)5 MK XIIA Test SetThe APM-424(V)5 supports both DoD AIMS 04-900A Option A (KIV-78) and Option Supports DoD AIMS 04-900A Option A – KIV-78 and Option B – KIV-77, & SIT-2010 crypto appliqués.
A leading edge RF signal generator/receiver designed for engineering manufacturing and return-to -service application
The IFF-45TS Transponder / Interrogator / TACAN Bench Test Set is an RF signal simulator that provides support for AIMS Mark XIIA transponders and interrogators. It operates under remote control from a computer or ATE system and provides versatile signal generation and measurement capability of Mark XIIA system signals in bench and over-the-air applications.
Replies and interrogations can be individually configured to support testing requirements. ADS-B Out testing monitors ADS-B, TIS-B, ADS-R and Acquisition squitters. The IFF-45TS emulates either a TACAN ground transponder or a TACAN airborne interrogator, providing six TACAN test modes.
- Ground to Air
- Inverse Air to Air
- Inverse Ground to Air
- Beacon Ground to Air
- Air to Air
- Beacon Air to Air
The IFF-7300S Series is a powerful computer based system designed for the test and diagnosis of military avionics, including IFF transponders, interrogators, cryptos, and DME/TACAN transceivers with following features and benefits.
Aircraft emulation and test setup :The IFF-7300S contains all required resources and emulates all necessary signals that the aircraft exerts on the unit under test (UUT). No need for an external power supply. The radio is completely set up and ready for full testing.
Test modes : Automated return-to-service testing (Level 1 / O-Level). Automated module level diagnostics (Level 2 / I-Level). Manual mode testing using the VIAVI proprietary Virtual PanelTM application software.
In-house test/repair capability eliminates shipping delays and saves money by reducing number of spares needed and eliminating No Fault Found testing fees, repair charges and shipping fees
The ATC-5000NG is an RF signal generator/receiver for testing Mode A, C and S transponders. It was designed with modern software defined radio technology and is the replacement product for the commercial functionality of the SDX-2000, ATC-1400A and S-1403DL.
The test set was designed for engineering development, design validation, manufacturing and return-to-service testing. Also have the features of Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes. ADS-B Target Generator. ADS-B squitter encode/decode. DO-260, DO-260A and DO-260B data parsing. DO-260B canned tests. Generates ATCRBS/Mode S interrogations Multi-receiver test capability. UAT TX/RX capability. Pulse and frequency measurement.
NextGen TCAS Test Set and ADS-B Target Generator. The RGS-2000NG TCAS Test Set is an RF signal generator/ receiver for testing Traffic Alert and Collision Avoidance Systems (TCAS) with an option available for testing transponder LRUs.
It is designed with modern software-driven digital modulation technology and is the RGS-2000 replacement for engineering development, design validation, manufacturing and return-to-service testing. Equipment tested includes TCAS computers, ADS-B In receivers (including ground station), ADS-R and TIS-B ground station transmitters, and Mode S/ADS-B Out transponders.
Quickly test or troubleshoot all types of radio altimeter test systems.
The ALT-9000 provides altitude simulations with true RF time delay and path loss models to test any format of radio altimeter system including Low Probability of Intercept (LPI), Combined Altitude Radar Altimeter (CARA) & Next Generation variants.
Key Features- Fiber optic delay line-based test set supports all formats of radio altimeters
- Portable ruggedized enclosure for flight line or benchtop use
- Battery operated
- Simulates static altitudes from 0* ft. to 10,000 ft. in 10 ft. steps (*minimum simulated altitude dependent upon AID and test cable length)
- +20 dB of power level offset from nominal loop loss value
- Touch-screen operation
- Direct-connect to UUT T/R or installed system via antenna couplers